What is Flooded Evaporators
1. Flooded evaporators are the efficient heat exchanger developed in the air-conditioning and refrigeration industries.
2. There are many pin-shaped small holes on the surface of the heat exchange tube, and there are spiral protrusions on the inner surface of the tube to strengthen the heat transfer on the secondary refrigerant side.
3. This high-efficiency heat transfer tube that simultaneously enhances boiling outside the tube and heat transfer inside the tube increases its heat transfer coefficient by about 3 to 5 times compared to the smooth tube.
Technical Parameters:
| Model | Heat Exchange Capacity（KW） | Chilled Water In/outlet （inch） |
Refrigerant Inlet （inch） |
Refrigerant Outlet（inch） | Length A （mm） |
Width B （mm） |
Height C （mm） |
Weight （kg） |
||
| R22 | R134a | R407C | ||||||||
| UCM100A | 352 | 281 | 317 | 4" | 1-1/8",1-3/8" | 4" | 2837 | 617 | 711 | 617 |
| UCM150A | 528 | 422 | 475 | 5" | 1-1/8",1-3/8" | 5" | 3446 | 666 | 781 | 778 |
| UCM200A | 703 | 563 | 633 | 5" | 2-1/8",1-3/8" | 5" | 3446 | 760 | 845 | 798 |
| UCM250A | 879 | 703 | 791 | 6" | 2-1/8",2-1/8" | 5" | 3946 | 760 | 845 | 910 |
| UCM300A | 1055 | 844 | 950 | 6" | 2-1/8",1-5/8" | 4" | 3992 | 718 | 900 | 1299 |
| UCM400A | 1407 | 1125 | 1266 | 6" | 2-1/8",1-5/8" | 4" | 3992 | 718 | 900 | 1391 |
Our Advantages
Focus on Quality
Adopt 1.1mm thickness special heat exchange tube, T-shaped heat exchange tube greatly increases the heat transfer area.
Cost Saving
The tube side is designed as 3 systems, increasing the flow rate of refrigerant to improve the heat transfer efficiency.
Customized Available
Adapt to compressors such as screw, centrifugal and magnetic type. The difference between the effluent temperature and the evaporation temperature approaches and low resistance.
100% Testing
X-ray Leakage test, Water Bath Leakage Test, N2 Pressure Test with third party certification for each heat exchanger before shipment.
Related Products
Finned Condenser-
Finned Condenser
The finned condenser is made of copper foil and are suitable for air-cooled heat pumps, low-temperature source heat pumps and other fields.
Air Source Heat Exchanger-
Air Source Heat Exchanger
The copper foil air source heat exchanger is designed for the use environment of the ocean and offshore areas. It is widely used in air-conditioning and cooling systems for offshore drilling platforms, ocean-going ships, and offshore buildings. It is...
Surface Cooler Evaporator-
Surface Cooler Evaporator
Professional non-standard design, high efficiency, high quality
Air Cooled Condenser-
Air Cooled Condenser
The air cooled condenser has its own fan. It has the functions of condenser and cooling tower in the refrigeration system. Air cooled condenser avoids the trouble of cooling water treatment and is easy to manage.
Air Cooled Heat Exchanger-
Air Cooled Heat Exchanger
The Air cooled heat exchanger has its own fan. It has the functions of condenser and cooling tower in the refrigeration system. It avoids the trouble of cooling water treatment and is easy to manage. It can directly distribute the heat in the system ...
DX Type Hot Sale Shell And Tube Evaporator Refrigeration Parts-
DX Type Hot Sale Shell And Tube Evaporator Refrigeration Parts
Product Parameter Dry type single circuit evaporator : Remarks: 1. Parameter of nominal heat exchange: evaporation temperature Te=2 ℃ , incoming water temperature Ti=12℃ , outgoing water temperature To=7℃ , degree of superheat 5℃ . 2. Operating condi...
DX Shell And Tube Evaporator And Direct Expansion Teyp Evaporator-
DX Shell And Tube Evaporator And Direct Expansion Teyp Evaporator
The introduction of the DX evaporators By Following the international standards the dry type evaporators were manufactured strictly by UAR with high quality. E Evaporator: Which cold water flows in the shell and the tube.In the dry evaporator system ...
Dry Evaporator-
Dry Evaporator
Dry evaporator is one of the shell and tube heat exchanger. The refrigerant passes through the heat exchange tube, and the refrigerant runs outside the heat exchange tube. The oil return is convenient, the control is relatively simple, the refrigeran...
Shell And Tube Flooded Type Evaporator System For Heat Exchanger-
Shell And Tube Flooded Type Evaporator System For Heat Exchanger
Product Introduction Flooded type evaporator Flooded evaporator this series of products is a new generation of high efficiency heat exchanger developed by our company for air conditioning and refrigeration industry on the basis of the original shell ...
UAR Shell And Tube Flooded Evaporator Heat Exchanger-
UAR Shell And Tube Flooded Evaporator Heat Exchanger
UAR flooded shell and tube evaporator adopts an evaporating tube with a highly strengthened surface.
Flooded Evaporators-
Flooded Evaporators
The secondary refrigerant passes through the heat exchange tube, the refrigerant flows in the shell side and completely immerses the heat exchange tube, and evaporates outside the heat exchange tube after absorbing heat.
UAR UCP Series Single Falling Film Type Evaporator Shell And Tube Evaporator-
UAR UCP Series Single Falling Film Type Evaporator Shell And Tube Evaporator
The combined single falling film type evaporator is a new type of high-efficiency hvac shell and tube evaporator, also known as a horizontal tube evaporator.
Falling Film Evaporator-
Falling Film Evaporator
Falling film evaporator is that the refrigerant is evenly distributed to the surface of the heat exchange tube through the liquid separator designed at the top, forming a film-like evaporation and efficient exchange heat with the medium in the tube.
Hot Sale Shell And Tube Heat Exchanger Copper Tube Condenser-
Hot Sale Shell And Tube Heat Exchanger Copper Tube Condenser
Heat Exchanger Condenser Parameter(Only for Reference) Remarks: 1. Parameter of nominal heat exchange: condensing temperature Te=40℃ , incoming water temperature Ti=30℃, outgoing water temperature To=35℃, degree of supercooling 5℃. 2. Operating condi...
U Tube Condenser-
U Tube Condenser
U tube condenser composed of two parts: an outer shell and an internal cooling part.
Finned Tube Condenser-
Finned Tube Condenser
With people's demand for heating, finned tube condenser is widely used in low-temperature heating, and the heating performance is stable.
Finned Condenser-
Finned Condenser
The finned condenser is made of copper foil and are suitable for air-cooled heat pumps, low-temperature source heat pumps and other fields.
Air Source Heat Exchanger-
Air Source Heat Exchanger
The copper foil air source heat exchanger is designed for the use environment of the ocean and offshore areas. It is widely used in air-conditioning and cooling systems for offshore drilling platforms, ocean-going ships, and offshore buildings. It is...
Surface Cooler Evaporator-
Surface Cooler Evaporator
Professional non-standard design, high efficiency, high quality
Air Cooled Condenser-
Air Cooled Condenser
The air cooled condenser has its own fan. It has the functions of condenser and cooling tower in the refrigeration system. Air cooled condenser avoids the trouble of cooling water treatment and is easy to manage.
Air Cooled Heat Exchanger-
Air Cooled Heat Exchanger
The Air cooled heat exchanger has its own fan. It has the functions of condenser and cooling tower in the refrigeration system. It avoids the trouble of cooling water treatment and is easy to manage. It can directly distribute the heat in the system ...
DX Type Hot Sale Shell And Tube Evaporator Refrigeration Parts-
DX Type Hot Sale Shell And Tube Evaporator Refrigeration Parts
Product Parameter Dry type single circuit evaporator : Remarks: 1. Parameter of nominal heat exchange: evaporation temperature Te=2 ℃ , incoming water temperature Ti=12℃ , outgoing water temperature To=7℃ , degree of superheat 5℃ . 2. Operating condi...
DX Shell And Tube Evaporator And Direct Expansion Teyp Evaporator-
DX Shell And Tube Evaporator And Direct Expansion Teyp Evaporator
The introduction of the DX evaporators By Following the international standards the dry type evaporators were manufactured strictly by UAR with high quality. E Evaporator: Which cold water flows in the shell and the tube.In the dry evaporator system ...
Dry Evaporator-
Dry Evaporator
Dry evaporator is one of the shell and tube heat exchanger. The refrigerant passes through the heat exchange tube, and the refrigerant runs outside the heat exchange tube. The oil return is convenient, the control is relatively simple, the refrigeran...
Shell And Tube Flooded Type Evaporator System For Heat Exchanger-
Shell And Tube Flooded Type Evaporator System For Heat Exchanger
Product Introduction Flooded type evaporator Flooded evaporator this series of products is a new generation of high efficiency heat exchanger developed by our company for air conditioning and refrigeration industry on the basis of the original shell ...
UAR Shell And Tube Flooded Evaporator Heat Exchanger-
UAR Shell And Tube Flooded Evaporator Heat Exchanger
UAR flooded shell and tube evaporator adopts an evaporating tube with a highly strengthened surface.
Request a Quote
Let's make our planet greener.
CONTACT US
Address: No.1 GuoYuan 4th Rd. The Northern Part of the Eastern Section, Guangzhou, Guangdong Province, China.
